Skip to main content

How to change the configuration assigned to a device

A device gets its configuration from its group: change the group's configuration, or move the device to another group.

Written by Jeremy Bodokh

In Appaloosa, a configuration is never assigned to a device directly. Every device belongs to a group, and the group decides which configuration the device receives.

To change the configuration of a device, you can either:

  • change the configuration of the group the device belongs to (this affects every device of that group), or

  • make the device join another group, which has the configuration you want.

Check the current group and configuration of a device

Go to Devices > Inventory and open the device. Its Group and Device configuration are listed on the device page.

Option 1: change the configuration of the group

  1. Go to Devices > Groups and select the tab matching the device type (for example iOS Managed or Android Managed).

  2. Open the group, then click Edit on the Overview tab.

  3. In Configuration, select the configuration to apply, then click Save.

The new configuration is sent automatically to every device of the group. Nothing has to be done on the devices.

Good to know:

  • Only configurations of the same type as the group are listed (an iOS Managed group only offers iOS Managed configurations). To create one, go to Devices > Configurations and click Create configuration.

  • If a subgroup has no configuration, it uses the configuration of its parent group, shown as "(inherited from a parent group)".

  • The Default group cannot be edited: it always uses the default configuration of its type. To change what its devices receive, edit that default configuration in Devices > Configurations, or move the devices to another group (Option 2).

Option 2: move the device to another group

Groups are dynamic: a device joins or leaves a group automatically depending on the group's filters. To move a device, you change what the device matches, not the group membership itself. Custom attributes are the easiest way to do this.

  1. Define your attributes. Go to Settings > Overview and name your attributes in the Custom Device Attributes card (for example Department and Country). See How to add custom attributes to your managed devices.

  2. Set the values on the device. Open the device, go to the Custom Attributes tab, click Edit and fill in the values (for example Sales and FR).

  3. Create the target group. Go to Devices > Groups, select the tab matching the device type and click New group.

  4. Add the filters. On the Filters tab, click Add Rule for each condition (for example Department is equal to Sales). Use Preview devices to check which devices match, then click Save.

  5. Assign the configuration to the group, as described in Option 1.

From now on, any device that matches the filters joins the group and receives its configuration. A device that stops matching leaves the group and receives the configuration of its new group.

Besides custom attributes, you can filter on built-in fields such as Model, Serial number or Owner email.

You can also filter on the User group of the device's user. For example, the rule User group is equal to Sales matches every device whose user belongs to the Sales user group. If you add several User group rules, the user must belong to all of them. Devices with no assigned user never match this filter.

Which group does a device end up in?

When a device is enrolled, it automatically joins the group whose filters it matches, or the Default group of its type if it matches none. This is not fixed: as soon as the device starts matching another group, for example because you changed its custom attributes or edited the filters of a group, it moves to that group and receives its configuration.

  • A device only joins groups of its own type (iOS Managed, Android BYOD, and so on).

  • A device that matches no group stays in the Default group of its type and receives the default configuration.

  • When a device matches a group and one of its subgroups, the most specific subgroup wins.

  • Watch out for conflicts: if a device matches two groups that are not parent and child, it is marked as Group conflict and does not receive any configuration update until the conflict is solved. Make your filters mutually exclusive, or turn one group into a subgroup of the other.

Example

You want all iOS Managed devices of the Sales team in France to get a specific set of apps and restrictions:

  1. Create an iOS Managed configuration named iOS Managed Sales FR.

  2. Set the custom attributes Department = Sales and Country = FR on these devices.

  3. In the iOS Managed tab of Devices > Groups, create a group Sales FR with the filters Department is equal to Sales and Country is equal to FR.

  4. Assign iOS Managed Sales FR to the group.

Every new Sales device in France with these attributes then receives the right configuration automatically.

Did this answer your question?