Skip to main content

FileVault for macOS Devices

Require disk encryption on your managed Macs and retrieve the FileVault recovery key when a user forgets their password.

Written by Jeremy Bodokh

FileVault encrypts the whole disk of a Mac, so the data cannot be read if the machine is lost or stolen. Appaloosa lets you require it from your device configuration, and keeps the recovery key safe so you can still get into a device when a user forgets their password.

Require FileVault

Open your macOS configuration, go to the Configuration tab and use the FileVault card. The FileVault option decides whether encryption is required on the devices using this configuration.

Watch out for the default: your store's Default configuration requires FileVault out of the box, but a configuration you create yourself starts with the option disabled. If you build your own macOS configurations, enable it explicitly — otherwise those devices will not be encrypted.

Like the other fields, it can be locked from the default configuration so every macOS configuration inherits the same value and nobody can turn it off — see Lock Configurations.

The FileVault pane during enrolment

On a device enrolled through Automated Device Enrollment, Apple's Setup Assistant can show a FileVault pane. You choose whether the user sees it from the ADE tab, in Manage Setup Assistant — the FileVault entry shows or skips the FileVault setup screens. All the panes are listed in Automated Device Enrollment and Setup Assistant options.

Checking whether a device is encrypted

Each Mac reports its FileVault state, shown on the device page. Note that this data may take 24 hours to be updated, so a freshly encrypted device will not flip to encrypted immediately.

As soon as a device reports FileVault as active, Appaloosa retrieves the recovery key and stores that key encrypted. You do not have to collect anything yourself.

Retrieving the recovery key

The recovery key unlocks the device or resets its password when a user has forgotten it. To get it, open the device page, then Get the FileVault key and click Show.

A few things to know before you do:

  • Only administrators and support users can see it. The device also has to be enrolled and to have already reported its key.

  • Every access is recorded in the device's action history, so there is always a trace of who retrieved a key and when.

  • The key decrypts the entire disk. Share it only with the authorised user, and never store it in plain text.

If the option is not offered on a device, it is usually because the Mac has not reported a key yet — either FileVault is not active on it, or the state has not been refreshed yet.

Going further

Did this answer your question?