Skip to main content

Wi-Fi Network Configuration

Learn how to create and deploy Wi-Fi network profiles to your managed devices with Appaloosa.

Written by Jeremy Bodokh

Overview

Appaloosa allows you to create Wi-Fi network profiles and deploy them to your devices.

Once deployed, devices can automatically connect to the configured network without any manual setup from end users.

Wi-Fi network profiles are managed independently and can be assigned to one or more device configurations.

Creating a Wi-Fi Network

  1. Go to Assets > Wi-Fi Networks

  2. Click New Wi-Fi Network

  3. Fill in the required fields

  4. Click Save

Basic Settings

  • Name — A unique name for this Wi-Fi profile (used for identification in Appaloosa only)

  • SSID — The name of the Wi-Fi network the device will connect to

  • Hidden Network — Enable this if the network does not broadcast its SSID

  • Security — The authentication protocol used by the network (see Security Types below)

  • Password — Required for WPA-PSK and WEP-PSK networks

  • MAC Address Randomization — Enabled by default. When disabled, the device uses its physical MAC address instead of a random one

Security Types

Appaloosa supports the following Wi-Fi security protocols:

  • None — Open network with no authentication. No password required.

  • WEP-PSK — Legacy encryption using a pre-shared key. A password is required.

  • WPA-PSK — Standard encryption using a pre-shared key. A password is required.

  • WPA-EAP — Enterprise authentication. Requires additional EAP configuration (see below).

WPA-EAP (Enterprise) Configuration

When using WPA-EAP security, additional settings must be configured for enterprise authentication.

EAP Settings

  • EAP Type — The enterprise authentication protocol. Currently PEAP is supported.

  • Username — The identity used for authentication. Supports wildcards.

  • Password — The EAP password. Supports wildcards.

  • Anonymous Identity — An outer identity sent during the initial TLS handshake to protect the real username. Required when TLS minimum version is set to 1.3.

  • One-Time Password — A one-time password for authentication (optional, alternative to password).

TLS Settings

  • Minimum TLS Version — The minimum TLS version accepted (1.0, 1.1, 1.2, or 1.3). Default: 1.0

  • Maximum TLS Version — The maximum TLS version accepted (1.0, 1.1, 1.2, or 1.3). Default: 1.2

  • Trusted Server Names — Domain names used to verify the authentication server identity. You can add multiple entries.

  • Require TLS Certificate — When enabled, a TLS certificate is required for the connection.

Certificates

For WPA-EAP networks, you can attach certificates to validate the server and authenticate the client:

  • CA Certificates — Used to validate the authentication server. You can attach multiple CA certificates.

  • Client Certificate — Used to authenticate the device to the server. Only one client certificate can be attached.

Certificates must first be uploaded in Assets > Certificates before they can be attached to a Wi-Fi network.

Proxy Settings

You can optionally configure a proxy for the Wi-Fi network. Two proxy modes are available:

Manual Proxy

  • Proxy Server — The hostname or IP address of the proxy server (required)

  • Proxy Port — The port number of the proxy server (required)

  • Proxy Username — Username for proxy authentication (optional, supports wildcards)

  • Proxy Password — Password for proxy authentication (optional)

Automatic Proxy (PAC)

  • PAC URL — The URL of the Proxy Auto-Configuration file (required)

  • Allow Fallback — When enabled, the device can connect directly if the PAC file is unavailable

Wildcards

Several fields support dynamic placeholders that are replaced with device-specific or user-specific values when the profile is deployed. Wildcards can be used in: Wi-Fi password, EAP username, EAP password, and proxy username.

See the full list of wildcards available on Appaloosa for all supported placeholders.

Deploying Wi-Fi Networks to Devices

  1. Go to Assets > Wi-Fi Networks and select the Wi-Fi network you want to deploy

  2. Click on the Deployment tab

  3. Click Edit

  4. Select the device configurations that should receive this Wi-Fi profile

  5. Click Save

Once saved, the Wi-Fi profile is automatically pushed to all devices assigned to the selected configurations. Devices will connect to the configured network without user intervention.

FAQ

Can I assign the same Wi-Fi network to multiple configurations?
Yes. A Wi-Fi network profile can be deployed to as many device configurations as needed.

Can a device configuration have multiple Wi-Fi networks?
Yes. You can assign multiple Wi-Fi network profiles to the same device configuration.

What happens when I update a Wi-Fi network profile?
The updated settings are automatically pushed to all devices that have this Wi-Fi network deployed through their configuration.

Can I use WPA-EAP with BYOD devices?
Yes. WPA-EAP is supported on both BYOD and managed devices across iOS, iPadOS, macOS, and Android.

Did this answer your question?