Skip to main content

How to enrol a fully managed Android device?

How to enrol Android Enterprise devices (Samsung, Xiaomi, Google…) or ruggedised devices (Zebra, Honeywell, Datalogic, M3Mobile…) in fully managed mode.

Written by Jeremy Bodokh

Appaloosa can enrol Android Enterprise devices (Samsung, Xiaomi, Google, Motorola…) and ruggedised devices (Zebra, Honeywell, Datalogic, M3Mobile, Bluebird, Crosscall…) in fully managed mode. In this mode Appaloosa manages the whole device instead of a single work profile.

Every method below leads to the same result. Once the enrolment is complete, the device configuration and its applications are applied automatically according to the criteria you defined on Appaloosa. Pick the one that matches how your devices reach you. If you are not sure which mode fits your project, start with the overview of the Android enrolment modes.

Before you start

Check these four points, they cover most of the enrolments that fail on the first try.

  • Your Android Enterprise account is linked to Appaloosa. Without it, the Android Managed option shows a configuration message instead of the enrolment screens. You can link it from Settings, Google.

  • The device is brand new or factory reset. Fully managed mode can only be set up during the initial Android setup, never on a device that has already been configured. A device that is already enrolled has to be reset before it can be enrolled again.

  • The device runs Android 8.0 or later with Google Mobile Services. Models sold without the Google services cannot be enrolled in fully managed mode.

  • The device can reach the internet during its setup, through Wi-Fi or a SIM card. You can also embed a Wi-Fi network in the QR Code, see below.

Scan a QR Code

This is the fastest way to enrol a device you already have in hand, and it needs nothing set up beforehand. It works on any Android Enterprise Recommended device, any Android GMS device, and on ruggedised devices such as Crosscall, Zebra, Honeywell, Datalogic, M3Mobile or Bluebird.

1. Generate the QR Code on Appaloosa. Open Devices, Inventory, then click New device at the top right.

2. Choose Android Managed, then Managed. The two other tiles cover different projects: Managed with Work Profile keeps a personal space next to the professional one, and Dedicated is meant for single purpose devices, usually locked in kiosk mode.

3. Set the enrolment options, then click Generate. All the options are optional, the defaults work. They are described in the next section.

4. The QR Code appears. Keep the screen open if the device is next to you, or click Download to save the image and send it to whoever holds the device. The same QR Code can be reused for all your devices, it does not expire.

5. On the device, start it and tap 6 times on the very first screen of the Android setup. Android asks for a Wi-Fi network if it has none, downloads its QR Code scanner, then opens it. Scan the code.

6. The enrolment starts and the user is guided through the remaining steps.

Watch out for the 6 taps: they only work on the very first screen of the Android setup wizard, on a brand new or factory reset device. Scanning the QR Code with the regular camera app of a device that is already configured does nothing, it usually just copies the content to the clipboard.

The QR Code options

The form displayed before you click Generate lets you adjust the enrolment itself. It does not replace the device configuration, which is applied afterwards from the group the device lands in.

  • Force login to Appaloosa during enrollment: the user signs in with their Appaloosa account during the setup, and the device is assigned to them straight away. Leave it off to enrol a device that belongs to no one in particular, which is the usual choice for shared or ruggedised devices.

  • Activate system apps: enabled by default. If you turn it off, the system apps stay disabled on the device and you have to allow each one you need.

  • Skip educational screens: hides some of the guide screens shown during the setup.

  • Keep screen on: prevents the screen from turning off while the device is being enrolled.

  • Language: sets the language used by the device during and after the enrolment. Set it if your devices end up in English while your users expect another language.

  • Wi-Fi: pick a Wi-Fi network already declared in your environment, or type an SSID with its security and password. The device then connects on its own during the setup, which is what you want on devices without a SIM card.

  • Custom attributes: pre-fill your own device attributes, so the device arrives in your inventory already documented.

Enrol devices registered before delivery

When you order devices in volume, your reseller can register their identifiers so that each device already knows it belongs to your Appaloosa account the first time it boots. There is no QR Code to scan and no staging step: the device downloads its configuration as soon as it gets internet connectivity during its initial setup.

Both options below have to be prepared with your reseller before the devices ship.

Android Zero Touch (ZTE)

Zero Touch Enrollment works with devices purchased from an authorised Zero Touch reseller, who creates your Zero Touch account. You then declare Appaloosa as the EMM for those devices once in the Zero Touch console, and every device assigned to that configuration enrols on its own.

The Config. Zero Touch button displayed next to your generated QR Code gives you the values to paste in the Zero Touch console. Follow Using Appaloosa with Android Zero Touch to create the configuration and assign your devices to it.

Samsung Knox Mobile Enrollment (KME)

On Samsung devices, Knox Mobile Enrollment does the same job through Samsung's own portal, which is useful if your reseller supports Knox rather than Zero Touch. Follow How to create a Samsung Knox Mobile Enrollment for Appaloosa.

Zebra, Honeywell, M3Mobile or alternative software

On ruggedised devices you may prefer your vendor staging tool, StageNow for Zebra or Startup PC for M3Mobile, to combine the enrolment with your own device settings. Dedicated guides are available for Zebra devices with StageNow and for Honeywell devices.

These tools expect the payload carried by the QR Code. Here it is. Replace YOUR_TOKEN_HERE with the value displayed as Enrollment token just under the QR Code you generated at step 4, the small copy icon next to it puts it in your clipboard.

{
"android.app.extra.PROVISIONING_DEVICE_ADMIN_COMPONENT_NAME": "com.google.android.apps.work.clouddpc/.receivers.CloudDeviceAdminReceiver",
"android.app.extra.PROVISIONING_DEVICE_ADMIN_SIGNATURE_CHECKSUM": "I5YvS0O5hXY46mb01BlRjq4oJJGs2kuUcHvVkAPEXlg",
"android.app.extra.PROVISIONING_DEVICE_ADMIN_PACKAGE_DOWNLOAD_LOCATION": "https://play.google.com/managed/downloadManagingApp?identifier=setup",
"android.app.extra.PROVISIONING_ADMIN_EXTRAS_BUNDLE": {
"com.google.android.apps.work.clouddpc.EXTRA_ENROLLMENT_TOKEN": "YOUR_TOKEN_HERE"
},
"android.app.extra.PROVISIONING_LEAVE_ALL_SYSTEM_APPS_ENABLED": true
}

Set PROVISIONING_LEAVE_ALL_SYSTEM_APPS_ENABLED to false if you want the system apps to stay disabled on the device after the enrolment.

After the enrolment

The device appears in your inventory and applies on its own the configuration and the applications of the group it belongs to. From there you can:

Troubleshooting

Nothing happens when I scan the QR Code. The code is only readable by the Android setup wizard. If the content lands in your clipboard, you scanned it with the camera app of a device that is already configured. Factory reset the device and start again from its first setup screen.

I changed my device configuration, do I need a new QR Code? No. The QR Code only carries the enrolment settings. Your applications, your restrictions and your Wi-Fi networks come from the device configuration, which is applied after the enrolment and can be changed at any time. Generate a new QR Code only to change the enrolment options themselves, for instance to add the provisioning Wi-Fi or the language.

The device ends up in the wrong language. Set the Language option before generating the QR Code.

The enrolment stops right after the scan. The device needs internet access to download certain components. Check that it is connected, or embed a Wi-Fi network in the QR Code.

A device appeared in my inventory and nobody enrolled it. This usually comes from Zero Touch or Knox: a device registered by your reseller enrols on its own the first time it boots, without anyone touching the Appaloosa console.

Did this answer your question?